Automated M30
Supamaxx Hostile Vehicle Mitigation Bollards product family offers solutions for entries where pedestrians may enter unhindered but vehicle traffic is to be stopped. The attractive design makes the bollard useable in inner city surroundings and can be used for city security and traffic management.
Applications can range from temporary closing of city centres – but still allowing vehicles with permission to pass – to real estate properties with high security needs. Supamaxx products are widely used on military sites, at government buildings, embassies, banks and city centres.
Compact and crash bollards share a rigid steel tube as the blocking element and are available in different sizes. The lowered bollard adheres to bridge class 60, so even the heaviest wheeled vehicles can drive over it safely. All moving bollards are equipped with a hydraulic drive.
- Vehicle crash-tested to internationally accepted standards
- Robust construction with heavy gauge material and high tensile steel
- Fast operating times
- Easy installation due to ready-to-install bollard unit and separate control box
- Optional Emergency Fast Operation (EFO
- Installation in all climate zones possible
- Reliable operation and low maintenance
- Operation of up to five bollards with one common control unit
- Traversable in lowered position according to bridge class SLW 6
- Blocking element with optional top lighting
- Override facility for manual lowering
- Optional accumulator for emergency operation during power failure
Technical Data Automated M30 Bollard
Design
High security bollard in compact style with integrated hydraulic aggregate and separate control unit for up to five bollard units.
Impact Load
667kJ (7.5 t @ 48km/h)
Crash test certified according to PAS 68:2013 V/7500[N2]/48/90:0.0/0.0
IWA 14-1:2013 V/7200[N2A]/48/90:0.4
Blocking Height
1000mm above finished floor level
Emergency Operation
Bollard remains in the raised position during power failure and can be lowered manually
Accumulator and rechargeable battery pack for one raising movement (RO1) with charged accumulator (optional)
Operating Times
Raising: approx. 5-6 seconds – Lowering: approx. 3-4 seconds
Emergency fast operation (EFO): approx. 2-3 seconds raising (with optional accumulator)
Wheel Load
100kN according to SLW60 – DIN 1072
Drive
1.4kW nominal power, 400 Volt AC, three phase, 50 Hz
Hydraulic Fluid
Mineral oil HLP 22 or biodegradable oil Plantohyd 22 S-NWG, water hazard class 1
Control Unit
PLC in control box for wall installation inside a building, control voltage 24V max.
Distance between bollard
Control unit: 50m
Supply voltage
230/400V AC, 50Hz
Lighting (Optional)
Bollard top lighting, Ufo-shape, LED red, white or yellow
Tamper resistance
Reed contact for cover plate
Control Box
Control unit configuration Standard:
· HxWxD = 400x400x200mm, IP 66 (for single bollard unit)
· HxWxD = 600x400x200mm, IP 66 (for double up to penta bollard unit)
Control unit configuration Plus:
· HxWxD = 400x400x200mm, IP 66 (for single bollard unit)
· HxWxD = 600x400x200mm, IP 66 (for double up to penta bollard unit)
Control unit configuration Vario:
· HxWxD = 600x400x200mm, IP 66 (for single and double bollard unit)
· HxWxD = 600x600x200mm, IP 66 (for triple up to penta bollard unit)
Control unit configuration Vario RO 1:
· HxWxD = 800x400x300mm, IP 66 (for single up to triple bollard unit)
· HxWxD = 800x600x200mm, IP 66 (for quadruple and penta bollard unit)
Control Cabinet (Optional)
Control box installed in outdoor control cabinet complete with rain cover, hygrostat, thermostat, heater and outdoor coating
· HxWxD = 1000x800x400mm + 200mm socket (for control unit configuration Vario)
· HxWxD = 1200x1200x400mm + 200mm socket (for control unit configuration Vario RO1)
Weight
Approx. 870 kg incl. Metal housing
Colour (Standard)
Blocking element RAL 6005, 7016, 7030, 7035 or 9010
Bollard top plate galvanised finish
Cover plate galvanised finish
Metal housing galvanised finish
Metal housing frame galvanised finish
Installation frame galvanised finish
Colour (Optional)
Blocking element other RAL colour
Bollard top plate in RAL colour of blocking element
Cover plate in RAL colour of blocking element
Optional Finish
Blocking element with stainless steel sleeve and stainless steel top plate
Temperature Range
-20°C – 65°C Optional: Heating for up to -30°C
Data Sheet
M30 specifications
Enquire Now
Contact Supamaxx
