Road Blocker

Optimal security solution for highly sensitive entry points. 

Road Blockers offer maximum security for highly sensitive entry points against unauthorised vehicles of all sizes and weights. Typical areas of application are embassies, government seats, research and development centres, power stations, industrial plants, military sites, airports and other high security areas. The Road Blocker Barrier is designed to guarantee the full level of security.

The Road Blocker is designed to guarantee the full level of security. Typical areas of application are embassies, government seats, research and development centres, power stations, industrial plants, military sites, airports and other high security areas. It can be installed as a single unit or in combination with other products (e.g. barriers, gates, tyre killers or bollards) in order to realise a sluice arrangement forming a vehicle check point.

Technical Data

Design

Wedge with electro-hydraulic drive in separate drive cabinet. Optional: Wedge fitted with safety skirt

Impact Load

1852 kJ (7.5 t @ 80km/h)
Certified according to PAS68 V/7500[N3]/80/90:0.0/20.7 and I
WA 14-1 V/7200[N3C]/80/90:0.0

Blocking Width

2.0m, 2.5m, 3.0m, 3.5m and 4.0m

Blocking Height

1000mm

Base frame

L x W x H: (blocking width + 200mm) x 1950mm x 300mm

Drive Cabinet

H x W x D: 1400mm x 1200mm x 400mm incl. 200mm high base

Emergency Operation

Via hand pump (standard) Accumulator incl. rechargeable batteries for 3 movements (RO3) (optional)

Operating Times

Raising: approx. 3.5sec, lowering: approx. 3.5sec (standard) Emergency fast operation (EFO): approx. 1 sec (with optional accumulator

Wheel Load

100kN according to SLW60 – DIN 1072

Drive

4.0kW, 400 V (three-phase), 50Hz

Hydraulic Fluid

Mineral oil HLP 22 or biodegradable oil plantohyd 22 S – NWG, water hazard class 1

Control unit

PLC in control box installed in drive cabinet (standard), PLC in separate control box for wall mounting inside a building (optional),
control voltage 24 V

Supply voltage

400 V (3Ph + N + PE), 50 Hz

Control Box

Control unit configuration STANDARD: HxWxD = 400x400x200mm, IP 66
Control unit configuration VARIO BASIC: HxWxD = 600x400x200mm, IP 66
Control unit configuration VARIO EFO: HxWxD = 600x400x200mm, IP 66
Control unit configuration VARIO RO3: HxWxD = 800x400x300mm, IP 66

Weight

Approx. 1500 – 2000 (wedge) Approx. 280 – 400kg (drive cabinet)

Lighting (Optional)

LED-strip lighting and front cover fitted to impact beam

Colour (Standard)

Blocking element RAL 7030 stone grey
Base frame RAL 7030 stone grey
Cover plate RAL 7030 stone grey
Scissor joints RAL 3000 flame red
Hydraulic cylinder RAL 3000 flame red
Drive cabinet RAL 7035 light grey
Optional safety skirt RAL 3000 flame red

Colour (Optional)

Cover plate:
V-striped RAL 1007 daffodil yellow / RAL 9005 jet black,
V-striped RAL 3000 flame red / RAL 9010 pure white
Optional safety skirt:
Cross striped RAL 1007 daffodil yellow / RAL 9005 jet black cross striped RAL 3000 flame red / RAL 9010 pure white or other RAL colours or DB colours
Scissor joints, hydraulic cylinder, blocking element and base frame: other RAL colours

Temperature range

-20°C – 60°C

Catalogue

Road Blocker PDF catalogue

Data Sheet

Road Blocker specifications

Enquire Now

Contact Supamaxx